Tecumseh Verflüssigungssatz, HGA 4480 ZHR 230V Rollkolben

The HGA condensing units fits where other units do not. The HGA condensing unit is shorter:It has a height of no more than 220 mm. Compared with a condensing unit that uses a piston compressor, noise output can be reduced by up to 6 dBA with the HGA. The rolling piston principle with pusher and rotating piston ensures lower noise output. The vibration energy transferred from the compressor to the condensing unit is significantly lower due to the use of external vibration dampers with a high radial elasticity. The research and development departments at Tecumseh Europe have designed a condensing unit that generates only minimal vibrations. The difference in noise output is significant. The HGA condensing unit produces fewer low frequencies than a condensing unit with a piston compressor. The compressor housing filters out the remaining high frequencies.

The HGA condensing unit guarantees cooling performance even in high ambient temperatures. The quality and reliability associated with Tecumseh technology is a guarantee for the performance of the HGA condensing unit. The ventilation system has been very carefully selected. Contamination of the condenser is limited by one of the largest fin spacings available on the market.
The HGA condensing units lower the temperature of the air that is pushed through. The temperature of the air that is blown out is not as high thanks to a lower condensation temperature. The heat exchanger surface of the condenser has been optimised.
The HGA condensing units consume less power. Power consumption can be reduced by up to 30% from using an HGA unit. The efficiency of the HGA rolling piston compressor is higher than that of piston compressors.