Danfoss Heißgasmischer, LG16-28 069G4003
Popis zboží:
Weitere Informationen (DE)
The CPCE is a power regulator for adjusting compressor power to the actual evaporator load. The CPCE is installed into a bypass between the low and high pressure sides of a refrigeration system. It is specially design for guiding hot gas between the evaporator and the thermostatic expansion valve. Injection should be done using a type LG hot gas mixer.
Dimensioning and power
The following data about the refrigeration system is required when selecting a CPCE power regulator:
Refrigerant
Min. intake gas temperature tS
Compressor power PV at min. intake gas temperature
Min. evaporator power Q0
Condensation temperature tk
The regulator power can then be calculated at the compressor power minus the evaporator power at the minimum intake gas temperature and condensation temperature. The LG hot gas mixer is measured after the connection adapters.
The power is a result of a reduction in the intake pressure / the intake gas temperature by DtS = 4K. The specific intake gas temperatures are minimum values, i.e. values after reduction. The specified performance is made up of the hot gas power of the CPCE regulator and the additional power from the thermostatic expansion valve that maintains constant superheating across the evaporator.
Technické parametry
Spojení potrubí
| Páječ | 1 1 / 8 " | palec |
| Páječ | 28 | mm |
| Páječ | 1 1 / 8 " | palec |
| Páječ | 28 | mm |
| Páječ | 5 / 8 " | palec |
| Páječ | 16 | mm |
Technické parametry
| Parametr | Hodnota |
|---|---|
| Spojení potrubí | |
| Páječ | 1 1 / 8 " / palec |
| Páječ | 28 / mm |
| Páječ | 1 1 / 8 " / palec |
| Páječ | 28 / mm |
| Páječ | 5 / 8 " / palec |
| Páječ | 16 / mm |







